=============================================================================
                                 SOUNDCARD HELP

          The SETD program must be run to choose a sound card option for 
    "Strike Squad".  The SS batch file will run this program automatically 
    the first time you start "Strike Squad" and allow you to choose before 
    loading the game. 

          Common sound cards are listed, if you do not see your card and it 
    is either Adlib or Sound Blaster compatible then choose the appropriate  
    match.

          Sound drivers are automatically configured to the default values 
    for the appropriate card, if you are not using the default or have 
    selected a Sound Blaster compatible which uses setting different than 
    the Sound Blaster defaults you will need to configure to your specific 
    settings.  The I/O port setting defaults will appear, choose the 
    appropriate port by entering the value, then IRQ default will appear 
    and you can type in that value. 

         If sound problems occur with one of the sound cards listed, please 
    check your sound card documentation and be sure it is correctly set up 
    before contacting us, run sound board test software when possible to 
    determine you have chosen the correct settings.  If problems occur with 
    a card not listed but that should be 100% compatible to one listed, try 
    choosing the PC Speaker options to see if they work and problem may be 
    due to a board that is not as compatible as it suggests. 

         The sound drivers require XMS memory to load, please be sure you 
    have at least 2 MB of XMS memory free to load sound drivers and sound 
    effects.  Please consult the "Troubleshooting" section of your 
    Bloodstone manual for help on freeing up memory or use this HELP 
    program and select either memory help or the boot disk maker. 
 =============================================================================
                               - END OF FILE -